Product Details
HXYD Series – Hybrid Injection Molding Machine is a new solution scheme for high-end packaging industry, high-end daily necessities industry and medical supply industry, which is based on full-electric machine(Injection rate: 500mm/s; production was started in 2009) and high-speed machine (production was started in 2012). It is combined with the clamping parts of high-speed machine and injection parts of full-electric machine, taking into account the demand of energy saving and environmental protection. It meets the requirement of large clamping force and high performance injection unit for this kind of product. (Mould Open&Charge Simultaneously.)
Product Introduction:
1. Modular Injection Unit with Excellent Acceleration Performance
2. High-stiffness Clamping Unit for High-speed Machine.
3. Hydraulic System with High Response and Low Noise.
4. Optimized Control System Excellent in Response and Accuration for Hybrid Machine
| HXYD160 | ||||||||||
| Clamping Unit | ||||||||||
| Clamping force | kN | 1600 | ||||||||
| Moving mould-plate stroke | mm | 420 | ||||||||
| Max.Mould height | mm | 530 | ||||||||
| Min.Mould height | mm | 150 | ||||||||
| Space between tie-bars | mm | 520×470 | ||||||||
| Hydraulic ejector force | kN | 68 | ||||||||
| Hydraulic ejector stroke | mm | 130 | ||||||||
| Ejector number | n | 5 | ||||||||
| Injection Unit | i350 | i450 | i650 | |||||||
| Screw diameter | mm | 32 | 36 | 40 | 36 | 40 | 45 | 40 | 45 | 50 |
| Screw LD ratio | LD | 23.6 | 21 | 21 | 23.3 | 21 | 21 | 22.5 | 20 | 20 |
| lnjection capacity in theory | Cm³ | 144 | 183 | 226 | 183 | 226 | 286 | 263 | 334 | 412 |
| Injection weight(PS) | g | 131 | 166 | 205 | 166 | 205 | 260 | 240 | 303 | 375 |
| Injection pressure | bar | 2531 | 2000 | 1620 | 2469 | 2000 | 1580 | 2531 | 2000 | 1620 |
| Injection velocity | mm/s | 350 | 350 | 350 | ||||||
| Plasticizing capacity | g/s | 16 | 22 | 30 | 20 | 30 | 42 | 30 | 42 | 50 |
| Screw speed | rpm | 400 | 400 | 400 | ||||||
| Other | ||||||||||
| Pump pressure | MPa | 17.5 | ||||||||
| Motor/Driving power | kW | 37(注)+23(熔)+18.5(油) | 37(注)+23(熔)+18.5(油) | 37(注)+23(熔)+18.5(油) | ||||||
| Heating capacity | kW | 8.2 | 10.5 | 13.55 | ||||||
| Machine dimension | m | 5.2×1.49×1.61 | 5.90×1.49×1.72 | 5.61×1.49×1.82 | ||||||
| Machine weight | t | 6.5 | 7.8 | 7.1 | ||||||
| oil tank capacity | L | 190 | ||||||||