Product Details
HIGHSUN PVC fitting machine, clamping force:168-850T
1.Adopt the special design of screw & barrel for PVC material, install the air fan for cooling barrel to avoid the material overheating and coking;
2. Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
3.Extended width of security door for making PVC fitting mould with better installation, to suit PVC fitting molds (core puller cylinder) installation convenience;
4.Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution with complete hydraulic system and injection unit.
| MODEL:HXM168PVC | |||
| TECHNICAL PARAMETER TABLE | |||
| INJECTION UNIT | SCREW DIAMETER | mm | 42 |
| SCREW L/D RATIO | L/D | 22 | |
| INJECTION CAPACITY IN THEORY | cm3 | 318 | |
| INJECTION WEIGHT(PVC) | g | 375 | |
| INJECTION PRESSURE | MPa | 212 | |
| INJECTION RATE | g/s | 190 | |
| PLASTICIZING CAPACITY | g/s | 20 | |
| SCREW SPEED | rpm | 220 | |
| CLAMPING UNIT | CLAMPING FORCE | KN | 1680 |
| MOVING MOULD-PLATE STROKE | mm | 450 | |
| MAX. MOULD HEIGHT | mm | 550 | |
| MIN. MOULD HEIGHT | mm | 150 | |
| SPACE BWTWEEN TIE-BARS (W*H) | mm | 470*430 | |
| HYDRAULIC EJECTOR FORCE | KN | 56 | |
| HYDRAULIC EJECTOR STROKE | mm | 130 | |
| EJECTOR NUMBER | KN | 5 | |
| OTHERS | PUMP PRESSURE | MPa | 17.5 |
| MOTOR POWER | KW | 21 | |
| HEATING CAPACITY | KW | 10.95 | |
| MACHINE DIMENSION (L*W*H) | m | 5.03*1.51*1.93 | |
| MACHINE WEIGHT | t | 4.5 | |
| OIL TANK CAPACITY | L | 253 | |