Bottle cap compression molding machine with high capacity from 18000pcs per hour ,suitable for the pet bottle
-Low melting temperature,means energy saving and low cap cost.
-No injection point,means better performance.
-An effctive control of the production repeatability.
-Machine is easier and quicker to manage.
-Longer efficiency periods of the machine.
-Reduced and easier machine maintenance
https://www.youtube.com/embed/KiX9vmteLAM
Cap Compression Molding machine
Cap Compression Molding Machine: Cap compression molding machine is for making caps from plastic materials.The heated materials are extruded from extruder,cutted by segregation plate through screw driving and shared to each cavity equably,then molded to be caps by forming system. The machine is controlled by PLC,including frequency control system,hydraulic system,temperature control system and cooling system.The operating system is easy and automatic with man-machine conversation. As same production capacity,its cost is much lower than produced caps from injection machine.It perfects products with this technology,since there is no gate on cap or no waste of hot runner.
Advantages;
-Low melting temperature,means energy saving and low cap cost.
-No injection point,means better performance.
-An effctive control of the production repeatability.
-Machine is easier and quicker to manage.
-Longer efficiency periods of the machine.
-Reduced and easier machine maintenance.
Equipment Advantages.
1.Intelligent PLC controlling system
2.Human-machine interface, easy & stable operation
3.Machine adopts world-class industry design and processing crafts,exquisite electrical configuration and superb assembling technology
4. Easy computer operation realizes full-auto production from PP&PE resin to final caps.
5.Rotation compressing cap molding offers shorter recycling time,high yielding and fine final caps,caps with no injection point and easy for cap logo printing
6. Cap with high density, short change-over time for one color cap to another.
7.Low energy consumption,output triples compared with the traditional cap injectionmolding machine
8. Each cap mold is independently compressed, no runner scrap.
9.Easy and low cost mold maintenance
10.High efficiency, low price
| TYPE | MODEL | GY-C36H | GY-C24H | GY-C16H |
| Cap | Number of Cavity | 36cavities | 24cavities | 16cavities |
| Output | 28000-35000pcs/hr | 22000-25000pcs/hr | 11000-13000pcs/hr | |
| Raw Material | PP/HDPE/LDPE/PTE | PP/HDPE/LDPE/PTE | PP/HDPE/LDPE/PTE | |
| Diameter of Cap | 22-45mm | 22-45mm | 22-45mm | |
| Height of Cap | 10-25mm | 10-25mm | 10-25mm | |
| ELECTRICAL SYSTEM | Installation Power | 65kw | 55kw | 40kw |
| Actual Power Consumption | 35-38kw | 25-28kw | 16-20kw | |
| Power Supply(Three Phase,Five Wire) | 380V 50Hz | 380V 50Hz | 380V 50Hz | |
| AIR SYSTEM | Operatating Pressure | 0.8Mpa | 0.8Mpa | 0.8Mpa |
| Pressure Consuming | 1.0m³/hr | 1.0m³/hr | 1.0m³/hr | |
| MACHINE | Machine dimension | 5.3×2.15×2.65(m) | 4.3×1.95×2.65(m) | 3.8×1.75×2.65(m) |
| Machine weight | 7.0ton | 5.0ton | 3.8ton |
Note: The specifications are subject to change without notice for the further improvement.
!Note: Custom production accepted. Any client idea tried.
Maquina-de-press-moulding-tapas
Cap inspection system
We choose high precision inspection sensor to check bad cap.when sensor find out bad cap.
Cap inspection system will take bad cap automaticly.make sure good cap quality to your clients.
Cap Ring cutting machine
This machine is used to cut the bottle cap ring drawn by the mould press. The machine is equipped with automatic cap management and automatic control of cutting knife temperature, so the bottle cap slit made by this machine is small and smooth, and the bottle cap is more beautiful to use.
Cap Folding Machine
Through the motor to drive a number of mechanical rod linkage, so as to achieve the folding.
