| Pipestandards | Model | DS34-TA |
| standard | U-PVC1002.1-2006 (as request) |
| Diameter | 20mm- 34mm (1/2”, 3/4”, 1”) |
| Length | 3-4m |
| Electrical component | PLC and Screen | Siemens |
| low-voltage apparatus | Schneider, Omron, Autonics, etc. |
| Inverter | Yes, Bosch Rexroth |
| Total Power | 5.3KW |
| Use voltage | 380V, 50HZ, 3-phase (as request) |
| Wire dimension | 5*6 square millimeter |
| Pneumatic | Compressed air pressure | 0.6Mpa |
| Pneumatic valve | SNS |
| Pneumatic cylinder | SNS ISO standard |
| Equipmentappearance | Machine head | 2 units |
| Machine table | 1 unit |
| Chamfering device | yes |
| Blade | 2 sets |
| Scraps blowing | Yes |
| Center height | 1000mm (as request) |
| Height adjustment | Eletrical – via button |
| Machine color | Light grey RAL7032 (as request) |
| Machine dimension | 6600mm(L)×1700mm(W)×1750mm(H) |
| Machine weight | 3000kg |
| Operating principle | Machine type | 1. Online:Automatic, match with twin extrusion line, make two sides thread cutting per cycle2. Offline:Automatic, with pipes stock station, produce one by one, make two sides thread cutting per cycle |
| Machine speed | |
| Thread type | V-type outer thread |
| Blade material | W18Cr4V |
