| Pipestandards | Model | DS250-NI |
| standard | U-PVC1002.1-2006 (as request) |
| Diameter | 50mm – 250mm |
| Length | 4m – 6m |
| Heating | Oven | One heating oven, semi-enclosed heated，Stainless steel heating tube with a heat sink |
| Pipe Rotary | Clockwise and anti-clockwise |
| Thermocouple | K-type |
| Temperature controller | Omron |
| Heating Power | 11KW |
| Electrical component | PLC and Screen | Siemens |
| low-voltage apparatus | Schneider, Omron |
| Total Power | 14KW |
| Use voltage | 380V, 50HZ, 3-phase (as request) |
| Wire dimension | 3*16 square millimeter, and 1*10 square millimeter |
| Pneumatic | Compressed air pressure | 0.6Mpa |
| Pneumatic valve | SNS |
| Water | Water pressure | 0.4Mpa |
| Hydraulic | Hydraulic pressure | 6.3Mpa |
| Hydraulic oil | LHM-46, about 50 litre |
| Solenoid valve | Taiwan Ashun |
| Oil pump motor power | 3KW |
| Equipmentappearance | Machine type | Automatic, single line, one pipes per cycle |
| Center height | 1000mm (as request) |
| Height adjustment | Eletrical – via button |
| Machine color | Frame：Light grey RAL7032，Cover plate：Blue (as request) |
| Machine dimension | 7400mm(L)×1660mm(W)×1950mm(H) 1*40GP |
| Machine weight | 3200kg |
| Operating principle | U-type | Pushing the mould into pipe directly |
| R-type | With ext – pressure and collapsible mandrel |
| Cooling type | Water – cooling |
| Machine speed | 50S to 150S |
| Mould material | U-type：45# steel with Cr electroplating |
