| ipestandards | Model | DS160PP-NII |
| standard | PP pipes |
| Diameter | 50mm ,110mm,160mm |
| Length | 2m (6m) |
| Heating | Heating way | 3 heating stations, Contact heating byAluminum block,Stainless steel heating tube, with internal heating |
| Temperature controller | Omron with K-type Thermocouple |
| Heating Power | 18KW |
| Antishrinkage System | HMS-ATS | with Antishrinkage Technology (ATS) to avoid longterm shrinkage of sockets, sockets stable up to80°C, 1h hot water test |
| Electrical component | PLC and Screen | Siemens |
| low-voltage apparatus | Schneider, Omron |
| Total Power | 26KW |
| Use voltage | 380V, 50HZ, 3-phase (as request) |
| Wire dimension | 3*16 square millimeter, and 1*10 square millimeter |
| Pneumatic | Compressed air pressure | 2.4Mpa |
| Pneumatic valve | SNS |
| Water | Water pressure | 0.4Mpa |
| Hydraulic | Hydraulic pressure | 6.3Mpa |
| Hydraulic oil | LHM-46, about 50 litre |
| Solenoid valve | Taiwan Ashun |
| Oil pump motor power | 3KW |
| Equipmentappearance | Machine type | Automatic, single line,Φ50 / 2 pipes/cycleΦ110 / 1 pipe/cycleΦ160 / 1 pipe/cycle |
| Center height | 1000mm (as request) |
| Height adjustment | Eletrical – via button |
| Machine color | Light grey RAL7032 (as request) |
| Machine dimension | 5600mm(L)×2250mm(W)×2100mm(H) |
| Machine weight | 4500kg |
| Operating principle | Blow-type | Blow air by inner mould, take shape by outer mould |
| Cooling type | Water- cooling |
| Machine speed | 50/2 pipes 480+ pcs/h110/1 pipe 150+pcs/h160/1 pipe 60+pcs/h |
| Mould material | 45# steel with Cr electroplating |
| Gasket inserting device | No |
