Product Details
HIGHSUN PVC fitting machine, clamping force:168-850T
1.Adopt the special design of screw & barrel for PVC material, install the air fan for cooling barrel to avoid the material overheating and coking;
2. Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
3.Extended width of security door for making PVC fitting mould with better installation, to suit PVC fitting molds (core puller cylinder) installation convenience;
4.Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution with complete hydraulic system and injection unit.
| MODEL:HXM198PVC | |||
| TECHNICAL PARAMETER TABLE | |||
| INJECTION UNIT | SCREW DIAMETER | mm | 45 |
| SCREW L/D RATIO | L/D | 22 | |
| INJECTION CAPACITY IN THEORY | cm3 | 405 | |
| INJECTION WEIGHT(PVC) | g | 485 | |
| INJECTION PRESSURE | MPa | 185 | |
| INJECTION RATE | g/s | 210 | |
| PLASTICIZING CAPACITY | g/s | 26 | |
| SCREW SPEED | rpm | 190 | |
| CLAMPING UNIT | CLAMPING FORCE | KN | 1980 |
| MOVING MOULD-PLATE STROKE | mm | 500 | |
| MAX. MOULD HEIGHT | mm | 550 | |
| MIN. MOULD HEIGHT | mm | 200 | |
| SPACE BWTWEEN TIE-BARS (W*H) | mm | 530*480 | |
| HYDRAULIC EJECTOR FORCE | KN | 67 | |
| HYDRAULIC EJECTOR STROKE | mm | 140 | |
| EJECTOR NUMBER | KN | 5 | |
| OTHERS | PUMP PRESSURE | MPa | 17.5 |
| MOTOR POWER | KW | 21 | |
| HEATING CAPACITY | KW | 12.95 | |
| MACHINE DIMENSION (L*W*H) | m | 5.48*1.58*2.04 | |
| MACHINE WEIGHT | t | 5.9 | |
| OIL TANK CAPACITY | L | 272 | |