Product Details
HIGHSUN PVC fitting machine, clamping force:168-850T
1.Adopt the special design of screw & barrel for PVC material, install the air fan for cooling barrel to avoid the material overheating and coking;
2. Increased bigger grade oil motor to facilitate PVC raw material plasticizing and molding;
3.Extended width of security door for making PVC fitting mould with better installation, to suit PVC fitting molds (core puller cylinder) installation convenience;
4.Supply with special technical solution for PVC injection, not only modify the screw & barrel like others, but also the special solution with complete hydraulic system and injection unit.
| MODEL:HXM318PVC | |||
| TECHNICAL PARAMETER TABLE | |||
| INJECTION UNIT | SCREW DIAMETER | mm | 60 |
| SCREW L/D RATIO | L/D | 21 | |
| INJECTION CAPACITY IN THEORY | cm3 | 820 | |
| INJECTION WEIGHT(PVC) | g | 1012 | |
| INJECTION PRESSURE | MPa | 183 | |
| INJECTION RATE | g/s | 403 | |
| PLASTICIZING CAPACITY | g/s | 54 | |
| SCREW SPEED | rpm | 190 | |
| CLAMPING UNIT | CLAMPING FORCE | KN | 3180 |
| MOVING MOULD-PLATE STROKE | mm | 600 | |
| MAX. MOULD HEIGHT | mm | 690 | |
| MIN. MOULD HEIGHT | mm | 230 | |
| SPACE BWTWEEN TIE-BARS (W*H) | mm | 660*590 | |
| HYDRAULIC EJECTOR FORCE | KN | 86 | |
| HYDRAULIC EJECTOR STROKE | mm | 170 | |
| EJECTOR NUMBER | n | 13 | |
| OTHERS | PUMP PRESSURE | MPa | 17.5 |
| MOTOR POWER | KW | 40 | |
| HEATING CAPACITY | KW | 18.15 | |
| MACHINE DIMENSION (L*W*H) | m | 6.31*1.82*2.20 | |
| MACHINE WEIGHT | t | 9 | |
| OIL TANK CAPACITY | L | 415 | |